Running an up-to-date 6.0-STABLE with xorg-6.8.2. System is a dual Dell PIII with a PCI Matrox G450 to a single DVI flat panel on screen one. No second monitor. mga_hal port installed. It all works a treat until I switch from X back to the console with SHIFT-ALT-F1. This give me a blank screen with a monitor driven pop-up showing "Invalid refresh rate". If I then ALT-F7 to switch back to X the display returns normally. Any idea how I can get a clean switch from X to the console please? For logs see: Disabling ACPI (on a hunch from Google) didn't make any difference. dmesg: Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-STABLE #0: Sun Jan 8 22:59:21 UTC 2006 root@cromer.XXXXXXX.com:/usr/obj/usr/src/sys/CROMER2 ACPI APIC Table: Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (797.55-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383fbff real memory = 536862720 (511 MB) avail memory = 515817472 (491 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 1 cpu1 (AP): APIC ID: 0 ioapic0: Changing APIC ID to 2 ioapic0 irqs 0-23 on motherboard npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: on acpi0 cpu1: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 agp0: mem 0xec000000-0xefffffff at device 0.0 on pci0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at device 0.0 (no driver attached) pcib2: at device 2.0 on pci0 pci2: on pcib2 isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 7.1 on pci0 ata0: on atapci0 ata1: on atapci0 uhci0: port 0xdce0-0xdcff irq 19 at device 7.2 on pci0 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: at device 7.3 (no driver attached) fxp0: port 0xdc80-0xdcbf mem 0xfe100000-0xfe100fff,0xfe000000-0xfe0fffff irq 17 at device 13.0 on pci0 miibus0: on fxp0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:02:b3:2b:e0:3e pcib3: at device 17.0 on pci0 pci3: on pcib3 drm0: mem 0xf2000000-0xf3ffffff,0xf9ffc000-0xf9ffffff,0xf9000000-0xf97fffff irq 20 at device 0.0 on pci3 info: [drm] AGP at 0xec000000 64MB info: [drm] Initialized mga 3.2.1 20051102 fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0: port 0x378-0x37f,0x778-0x77f irq 7 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: on ppc0 plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 pmtimer0 on isa0 orm0: at iomem 0xc0000-0xc8fff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 uhub1: NEC Corporation USB2.0 Hub Controller, class 9/0, rev 2.00/1.00, addr 2 uhub1: 4 ports with 4 removable, self powered ums0: Microsoft Microsoft IntelliMouse\M-. Optical, rev 1.10/1.21, addr 3, iclass 3/1 ums0: 5 buttons and Z dir. Timecounters tick every 1.000 msec ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging disabled ad0: 114473MB at ata0-master UDMA33 acd0: CDROM at ata1-master UDMA33 ad3: 114473MB at ata1-slave UDMA33 GEOM_MIRROR: Device gm0 created (id=186279022). GEOM_MIRROR: Device gm0: provider ad0 detected. GEOM_MIRROR: Device gm0: provider ad3 detected. GEOM_MIRROR: Device gm0: provider ad3 activated. GEOM_MIRROR: Device gm0: provider ad0 activated. GEOM_MIRROR: Device gm0: provider mirror/gm0 launched. SMP: AP CPU #1 Launched! cd0 at ata1 bus 0 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/mirror/gm0s1a /var/log/Xorg.0.log: X Window System Version 6.8.2 Release Date: 9 February 2005 X Protocol Version 11, Revision 0, Release 6.8.2 Build Operating System: FreeBSD 6.0 i386 [ELF] Current Operating System: FreeBSD cromer.XXXXXXX.com 6.0-STABLE FreeBSD 6.0-STABLE #0: Sun Jan 8 22:59:21 UTC 2006 root@cromer.XXXXXXX.com:/usr/obj/usr/src/sys/CROMER2 i386 Build Date: 01 December 2005 Before reporting problems, check http://wiki.X.Org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 10 18:55:10 2006 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Simple Layout" (**) |-->Screen "Screen 1" (0) (**) | |-->Monitor "410pro" (**) | |-->Device "G450" (**) |-->Input Device "Mouse2" (**) |-->Input Device "Keyboard1" (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local/". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local/"). (WW) The directory "/usr/X11R6/lib/X11/fonts/CID/" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/Speedo/" does not exist. Entry deleted from font path. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/URW/,/usr/X11R6/lib/X11/fonts/webfonts/,/usr/X11R6/lib/X11/fonts/freefont/,/usr/home/mknight/fonts/,/usr/X11R6/lib/X11/fonts/bitstream-vera/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (II) Module ABI versions: X.Org ANSI C Emulation: 0.2 X.Org Video Driver: 0.7 X.Org XInput driver : 0.4 X.Org Server Extension : 0.2 X.Org Font Renderer : 0.4 (II) Loader running on freebsd (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (--) Using syscons driver with X support (version 2.0) (--) using VT number 9 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7190 card 1028,00de rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01 (II) PCI: 00:02:0: chip 1011,0024 card 0000,0000 rev 03 class 06,04,00 hdr 01 (II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr 80 (II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00 (II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00 (II) PCI: 00:0d:0: chip 8086,1229 card 8086,100c rev 08 class 02,00,00 hdr 00 (II) PCI: 00:11:0: chip 3388,0021 card 0000,0000 rev 15 class 06,04,00 hdr 01 (II) PCI: 01:00:0: chip 1002,4757 card 1028,00de rev 7a class 03,00,00 hdr 00 (II) PCI: 03:00:0: chip 102b,0525 card 102b,0d43 rev 85 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0084 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [1] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B] [2] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] [3] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xfb000000 - 0xfdffffff (0x3000000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xf5000000 - 0xf5ffffff (0x1000000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 2: bridge is at (0:2:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared) (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) PCI-to-PCI bridge: (II) Bus 3: bridge is at (0:17:0), (0,3,3), BCTRL: 0x000a (VGA_EN is set) (II) Bus 3 non-prefetchable memory range: [0] -1 0 0xf9000000 - 0xfaffffff (0x2000000) MX[B] (II) Bus 3 prefetchable memory range: [0] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B] (--) PCI: (1:0:0) ATI Technologies Inc 3D Rage IIC AGP rev 122, Mem @ 0xfc000000/24, 0xfbfff000/12, I/O @ 0xec00/8 (--) PCI:*(3:0:0) Matrox Graphics, Inc. MGA G400 AGP rev 133, Mem @ 0xf2000000/25, 0xf9ffc000/14, 0xf9000000/23, BIOS @ 0x80000000/17 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xec000000 from 0xefffffff to 0xebffffff (II) Active PCI resource ranges: [0] -1 0 0xfe000000 - 0xffffffff (0x2000000) MX[B]E [1] -1 0 0xfe100000 - 0xfe1fffff (0x100000) MX[B]E [2] -1 0 0xec000000 - 0xebffffff (0x0) MX[B]EO [3] -1 0 0x80000000 - 0x8001ffff (0x20000) MX[B](B) [4] -1 0 0xf9000000 - 0xf97fffff (0x800000) MX[B](B) [5] -1 0 0xf9ffc000 - 0xf9ffffff (0x4000) MX[B](B) [6] -1 0 0xf2000000 - 0xf3ffffff (0x2000000) MX[B](B) [7] -1 0 0xfbfff000 - 0xfbffffff (0x1000) MX[B](B) [8] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B) [9] -1 0 0x0000dc80 - 0x0000dcff (0x80) IX[B]E [10] -1 0 0x0000dce0 - 0x0000dcff (0x20) IX[B]E [11] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E [12] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B](B) (II) PCI Memory resource overlap reduced 0xfe000000 from 0xffffffff to 0xfe0fffff (II) PCI I/O resource overlap reduced 0x0000dc80 from 0x0000dcff to 0x0000dcbf (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xfe000000 - 0xfe0fffff (0x100000) MX[B]E [1] -1 0 0xfe100000 - 0xfe1fffff (0x100000) MX[B]E [2] -1 0 0xec000000 - 0xebffffff (0x0) MX[B]EO [3] -1 0 0x80000000 - 0x8001ffff (0x20000) MX[B](B) [4] -1 0 0xf9000000 - 0xf97fffff (0x800000) MX[B](B) [5] -1 0 0xf9ffc000 - 0xf9ffffff (0x4000) MX[B](B) [6] -1 0 0xf2000000 - 0xf3ffffff (0x2000000) MX[B](B) [7] -1 0 0xfbfff000 - 0xfbffffff (0x1000) MX[B](B) [8] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B) [9] -1 0 0x0000dc80 - 0x0000dcbf (0x40) IX[B]E [10] -1 0 0x0000dce0 - 0x0000dcff (0x20) IX[B]E [11] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E [12] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xfe000000 - 0xfe0fffff (0x100000) MX[B]E [6] -1 0 0xfe100000 - 0xfe1fffff (0x100000) MX[B]E [7] -1 0 0xec000000 - 0xebffffff (0x0) MX[B]EO [8] -1 0 0x80000000 - 0x8001ffff (0x20000) MX[B](B) [9] -1 0 0xf9000000 - 0xf97fffff (0x800000) MX[B](B) [10] -1 0 0xf9ffc000 - 0xf9ffffff (0x4000) MX[B](B) [11] -1 0 0xf2000000 - 0xf3ffffff (0x2000000) MX[B](B) [12] -1 0 0xfbfff000 - 0xfbffffff (0x1000) MX[B](B) [13] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B) [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [16] -1 0 0x0000dc80 - 0x0000dcbf (0x40) IX[B]E [17] -1 0 0x0000dce0 - 0x0000dcff (0x20) IX[B]E [18] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E [19] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B](B) (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 6.8.2, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font FreeType (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading extension GLX (II) LoadModule: "mga" (II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o (II) Module mga: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.1.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 0.7 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.4 (II) LoadModule: "kbd" (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o (II) Module kbd: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.4 (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400, mgag550 (II) Primary Device is: PCI 03:00:0 (--) Assigning device section with no busID to primary device (--) Chipset mgag400 found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xfe000000 - 0xfe0fffff (0x100000) MX[B]E [6] -1 0 0xfe100000 - 0xfe1fffff (0x100000) MX[B]E [7] -1 0 0xec000000 - 0xebffffff (0x0) MX[B]EO [8] -1 0 0x80000000 - 0x8001ffff (0x20000) MX[B](B) [9] -1 0 0xf9000000 - 0xf97fffff (0x800000) MX[B](B) [10] -1 0 0xf9ffc000 - 0xf9ffffff (0x4000) MX[B](B) [11] -1 0 0xf2000000 - 0xf3ffffff (0x2000000) MX[B](B) [12] -1 0 0xfbfff000 - 0xfbffffff (0x1000) MX[B](B) [13] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B) [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [16] -1 0 0x0000dc80 - 0x0000dcbf (0x40) IX[B]E [17] -1 0 0x0000dce0 - 0x0000dcff (0x20) IX[B]E [18] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E [19] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B](B) (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xfe000000 - 0xfe0fffff (0x100000) MX[B]E [6] -1 0 0xfe100000 - 0xfe1fffff (0x100000) MX[B]E [7] -1 0 0xec000000 - 0xebffffff (0x0) MX[B]EO [8] -1 0 0x80000000 - 0x8001ffff (0x20000) MX[B](B) [9] -1 0 0xf9000000 - 0xf97fffff (0x800000) MX[B](B) [10] -1 0 0xf9ffc000 - 0xf9ffffff (0x4000) MX[B](B) [11] -1 0 0xf2000000 - 0xf3ffffff (0x2000000) MX[B](B) [12] -1 0 0xfbfff000 - 0xfbffffff (0x1000) MX[B](B) [13] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B) [14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [19] -1 0 0x0000dc80 - 0x0000dcbf (0x40) IX[B]E [20] -1 0 0x0000dce0 - 0x0000dcff (0x20) IX[B]E [21] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E [22] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B](B) [23] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [24] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="X.Org Foundation" compiled for 6.8.2, module version = 0.1.0 ABI class: X.Org Video Driver, version 0.7 (--) MGA(0): Chipset: "mgag400" (G450) (II) Loading sub module "mga_hal" (II) LoadModule: "mga_hal" (II) Loading /usr/X11R6/lib/modules/drivers/mga_hal_drv.o (II) Module mga_hal: vendor="X.Org Foundation" compiled for 6.8.1, module version = 4.1.0 ABI class: X.Org Video Driver, version 0.7 (==) MGA(0): Matrox HAL module used (**) MGA(0): Depth 24, (--) framebuffer bpp 32 (==) MGA(0): RGB weight 888 (==) MGA(0): Using AGP 1x mode (--) MGA(0): Linear framebuffer at 0xF2000000 (--) MGA(0): MMIO registers at 0xF9FFC000 (--) MGA(0): Pseudo-DMA transfer window at 0xF9000000 (--) MGA(0): BIOS at 0x80000000 (II) Truncating PCI BIOS Length to 36864 (--) MGA(0): Video BIOS info block at offset 0x07CE0 (WW) MGA(0): Video BIOS info block not detected! (II) MGA(0): MGABios.RamdacType = 0x0 (==) MGA(0): Write-combining range (0xf9ffc000,0x4000) was already clear (==) MGA(0): Write-combining range (0xf2000000,0x2000000) (==) MGA(0): Write-combining range (0xf9000000,0x800000) was already clear (--) MGA(0): VideoRAM: 32768 kByte (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Loading /usr/X11R6/lib/modules/libi2c.a (II) Module i2c: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.2.0 ABI class: X.Org Video Driver, version 0.7 (==) MGA(0): Write-combining range (0xf9ffc000,0x4000) was already clear (==) MGA(0): Write-combining range (0xf2000000,0x2000000) (==) MGA(0): Write-combining range (0xf9000000,0x800000) was already clear (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (==) MGA(0): Write-combining range (0xa0000,0x10000) was already clear (II) MGA(0): I2C bus "DDC P1" initialized. (II) MGA(0): I2C device "DDC P1:ddc2" registered at address 0xA0. (II) MGA(0): I2C device "DDC P1:ddc2" removed. (II) MGA(0): I2C Monitor info: 0x87c0000 (II) MGA(0): Manufacturer: SAM Model: 10f Serial#: 1296707897 (II) MGA(0): Year: 2004 Week: 23 (II) MGA(0): EDID Version: 1.3 (II) MGA(0): Digital Display Input (II) MGA(0): Max H-Image Size [cm]: horiz.: 38 vert.: 30 (II) MGA(0): Gamma: 2.20 (II) MGA(0): DPMS capabilities: Off; RGB/Color Display (II) MGA(0): First detailed timing is preferred mode (II) MGA(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600 (II) MGA(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329 (II) MGA(0): Supported VESA Video Modes: (II) MGA(0): 720x400@70Hz (II) MGA(0): 640x480@60Hz (II) MGA(0): 640x480@67Hz (II) MGA(0): 640x480@72Hz (II) MGA(0): 640x480@75Hz (II) MGA(0): 800x600@56Hz (II) MGA(0): 800x600@60Hz (II) MGA(0): 800x600@72Hz (II) MGA(0): 800x600@75Hz (II) MGA(0): 832x624@75Hz (II) MGA(0): 1024x768@60Hz (II) MGA(0): 1024x768@70Hz (II) MGA(0): 1024x768@75Hz (II) MGA(0): 1280x1024@75Hz (II) MGA(0): 1152x870@75Hz (II) MGA(0): Manufacturer's mask: 0 (II) MGA(0): Supported Future Video Modes: (II) MGA(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) MGA(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) MGA(0): Supported additional Video Mode: (II) MGA(0): clock: 108.0 MHz Image Size: 376 x 301 mm (II) MGA(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 (II) MGA(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 (II) MGA(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz (II) MGA(0): Monitor name: SyncMaster (II) MGA(0): Serial No: HSCX601100 (II) MGA(0): end of I2C Monitor info (==) MGA(0): Using gamma correction (1.0, 1.0, 1.0) (==) MGA(0): Min pixel clock is 12 MHz (==) MGA(0): Max pixel clock is 360 MHz (II) MGA(0): 410pro: Using default hsync range of 30.00-81.00 kHz (II) MGA(0): 410pro: Using default vrefresh range of 56.00-75.00 Hz (II) MGA(0): Clock range: 12.00 to 360.00 MHz (II) MGA(0): Not using default mode "640x350" (vrefresh out of range) (II) MGA(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "640x400" (vrefresh out of range) (II) MGA(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "720x400" (vrefresh out of range) (II) MGA(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "640x480" (vrefresh out of range) (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "800x600" (vrefresh out of range) (II) MGA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "1024x768" (vrefresh out of range) (II) MGA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "1280x960" (hsync out of range) (II) MGA(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "1280x1024" (hsync out of range) (II) MGA(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (WW) (1600x1200,410pro) mode clock 162MHz exceeds DDC maximum 140MHz (II) MGA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (WW) (1600x1200,410pro) mode clock 175.5MHz exceeds DDC maximum 140MHz (II) MGA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "1600x1200" (hsync out of range) (II) MGA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "1600x1200" (hsync out of range) (II) MGA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "1600x1200" (hsync out of range) (II) MGA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "1792x1344" (hsync out of range) (II) MGA(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "1792x1344" (hsync out of range) (II) MGA(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "1856x1392" (hsync out of range) (II) MGA(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "1856x1392" (hsync out of range) (II) MGA(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "1920x1440" (hsync out of range) (II) MGA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "1920x1440" (hsync out of range) (II) MGA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "1152x768" (vrefresh out of range) (II) MGA(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (WW) (1400x1050,410pro) mode clock 155.8MHz exceeds DDC maximum 140MHz (II) MGA(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "1920x1440" (hsync out of range) (II) MGA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "2048x1536" (hsync out of range) (II) MGA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "2048x1536" (hsync out of range) (II) MGA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "1600x1200" (width too large for virtual size) (II) MGA(0): Not using default mode "1600x1200" (width too large for virtual size) (II) MGA(0): Not using default mode "1400x1050" (width too large for virtual size) (II) MGA(0): Not using default mode "1400x1050" (width too large for virtual size) (==) MGA(0): Write-combining range (0xf9ffc000,0x4000) was already clear (==) MGA(0): Write-combining range (0xf2000000,0x2000000) (==) MGA(0): Write-combining range (0xf9000000,0x800000) was already clear (II) MGA(0): Digital screen detected on first head. (--) MGA(0): Has SDRAM (--) MGA(0): Virtual size is 1280x1024 (pitch 1280) (**) MGA(0): *Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz (II) MGA(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (**) MGA(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz (II) MGA(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (**) MGA(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz (II) MGA(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (**) MGA(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz (II) MGA(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (**) MGA(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz (II) MGA(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (**) MGA(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz (II) MGA(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (**) MGA(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz (II) MGA(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (**) MGA(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz (II) MGA(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (**) MGA(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz (II) MGA(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (**) MGA(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz (II) MGA(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (**) MGA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) MGA(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (**) MGA(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz (II) MGA(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (**) MGA(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz (II) MGA(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (**) MGA(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz (II) MGA(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (**) MGA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz (II) MGA(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (--) MGA(0): Display dimensions: (380, 300) mm (--) MGA(0): DPI set to (85, 86) (II) MGA(0): YDstOrg is set to 0 (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.2 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.2.0 ABI class: X.Org Video Driver, version 0.7 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="X.Org Foundation" compiled for 6.8.2, module version = 0.1.0 ABI class: X.Org Video Driver, version 0.7 (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xf9000000 - 0xf97fffff (0x800000) MX[B] [1] 0 0 0xf9ffc000 - 0xf9ffffff (0x4000) MX[B] [2] 0 0 0xf2000000 - 0xf3ffffff (0x2000000) MX[B] [3] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [4] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [8] -1 0 0xfe000000 - 0xfe0fffff (0x100000) MX[B]E [9] -1 0 0xfe100000 - 0xfe1fffff (0x100000) MX[B]E [10] -1 0 0xec000000 - 0xebffffff (0x0) MX[B]EO [11] -1 0 0x80000000 - 0x8001ffff (0x20000) MX[B](B) [12] -1 0 0xf9000000 - 0xf97fffff (0x800000) MX[B](B) [13] -1 0 0xf9ffc000 - 0xf9ffffff (0x4000) MX[B](B) [14] -1 0 0xf2000000 - 0xf3ffffff (0x2000000) MX[B](B) [15] -1 0 0xfbfff000 - 0xfbffffff (0x1000) MX[B](B) [16] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B) [17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [22] -1 0 0x0000dc80 - 0x0000dcbf (0x40) IX[B]E [23] -1 0 0x0000dce0 - 0x0000dcff (0x20) IX[B]E [24] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E [25] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B](B) [26] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [27] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (==) MGA(0): Write-combining range (0xf9ffc000,0x4000) was already clear (==) MGA(0): Write-combining range (0xf2000000,0x2000000) (==) MGA(0): Write-combining range (0xf9000000,0x800000) was already clear (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (==) MGA(0): Write-combining range (0xa0000,0x10000) was already clear (--) MGA(0): 16 DWORD fifo (==) MGA(0): Default visual is TrueColor (II) MGA(0): Using 2252 lines for offscreen memory. (II) MGA(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles Solid filled trapezoids 8x8 mono pattern filled rectangles 8x8 mono pattern filled trapezoids Indirect CPU to Screen color expansion Screen to Screen color expansion Solid Lines Dashed Lines Scanline Image Writes Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 14 256x256 slots 5 512x512 slots (==) MGA(0): Backing store disabled (==) MGA(0): Silken mouse enabled (**) Option "dpms" (**) MGA(0): DPMS enabled (II) MGA(0): Using overlay video (==) MGA(0): Direct rendering disabled (==) RandR enabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (**) Option "Protocol" "Auto" (**) Mouse2: Device: "/dev/ums0" (**) Mouse2: Protocol: "Auto" (**) Option "CorePointer" (**) Mouse2: Core Pointer (**) Option "Device" "/dev/ums0" (==) Mouse2: Emulate3Buttons, Emulate3Timeout: 50 (**) Option "ZAxisMapping" "4 5" (**) Mouse2: ZAxisMapping: buttons 4 and 5 (**) Mouse2: Buttons: 5 (**) Option "CoreKeyboard" (**) Keyboard1: Core Keyboard (**) Option "Protocol" "standard" (**) Keyboard1: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xfree86" (**) Keyboard1: XkbRules: "xfree86" (**) Option "XkbModel" "pc105" (**) Keyboard1: XkbModel: "pc105" (**) Option "XkbLayout" "gb" (**) Keyboard1: XkbLayout: "gb" (**) Option "CustomKeycodes" "off" (**) Keyboard1: CustomKeycodes disabled (II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD) (II) XINPUT: Adding extended input device "Mouse2" (type: MOUSE) (II) Mouse2: SetupAuto: hw.iftype is 5, hw.model is 0 (II) Mouse2: SetupAuto: protocol is SysMouse (WW) fcntl(8, O_ASYNC): Inappropriate ioctl for device